Bar Supports
FCS-401
& FCS-402 Slab Bolsters
FCS-401
Slab bolster is used for supporting lower slab steel from slab form. Legs are
spaced 5” on center. Available in 3/4” to 3” heights in 5’-0”
lengths. Other lengths available on request.
FCS-402 Slab bolster with plastic tip is used for supporting lower slab steel from slab form. Legs are spaced 5” on center. Available in 3/4” to 3” heights in 5’-0” lengths. Other lengths available on request.
FCS-402 Slab bolster with plastic tip is used for supporting lower slab steel from slab form. Legs are spaced 5” on center. Available in 3/4” to 3” heights in 5’-0” lengths. Other lengths available on request.
FCS-411
High Chairs for Metal Decking
FCS-410
High chairs for metal decking are made with different length legs to fit design
of a metal deck. Other information same as individual high chairs.
Products
FCS-412
& FCS-413
Individual High Chairs
Individual High Chairs
FCS-412
Individual high chairs are designed to support upper slab steel from mat steel.
May also be used on fill to obtain leg bearing. Made to order in heights from
2” to 20”. Height is from underside of cross bars to seat for reinforcing
bar at top of chair. Also available with plastic tip or epoxy coated (FCS-413).
FCS-403
Slab Bolster Upper
FCS-403
Slab bolster upper is used for supporting one layer of steel above another and
spacing them to required distance. May be used on soft material or fill. Standard
leg spacing is 5” on centers. Heights and lengths are same as slab bolsters.
Fabricated in standard 5’-0” lengths. Other lengths available on request.
FCS-414
Special High Chairs
FCS-414
Special high chairs are used for supporting upper slab/deck steel directly or
by means of a carrier bar. When heights exceed 12”, legs are reinforced with
welded crosswires or encircling wire. Available in 2” to 20” heights.
FCS-404
Slab Bolster With Plate
FCS-404
Slab bolster with plate is used for supporting lower slab steel on fill or other
soft material. Details are the same as for standard slab bolster with the addition
of a bearing plate. Available in 5’-0” lengths only.
FCS-415
Individual High Chair
With Plate
With Plate
FCS-415
Individual high chair with plate is used for supporting lower slab steel on fill
or other soft material. Details are same as for individual high chairs with the
addition of two bearing plates.
FCS-405
& FCS-406 Beam Bolster
FCS-405
Beam bolster is used to support lower beam steel from the slab form. All legs
spaced 2-1/2” on centers. Available in 3/4” to 5” heights in 5’-0”
lengths. Other lengths available on request.
FCS-406 Beam bolster with plastic tip is used to support lower beam steel from the slab form. All legs spaced 2-1/2” on centers. Available in 3/4” to 5” heights in 5’-0” lengths. Other lengths available on request.
FCS-406 Beam bolster with plastic tip is used to support lower beam steel from the slab form. All legs spaced 2-1/2” on centers. Available in 3/4” to 5” heights in 5’-0” lengths. Other lengths available on request.
FCS-416
& FCS-417
Continuous High Chair
Continuous High Chair
FCS-416
Continuous high chair provides support for upper slab steel from slab form. Fabricated
in heights from 2” to 15” in 5’-0” lengths. Legs are spaced
7-1/2” on centers.
FCS-417 Continuous high chair with plastic tip provides support for upper slab steel from slab form. Fabricated in heights from 2” to 15” in 5’-0” lengths. Legs are spaced 7-1/2” on centers.
FCS-417 Continuous high chair with plastic tip provides support for upper slab steel from slab form. Fabricated in heights from 2” to 15” in 5’-0” lengths. Legs are spaced 7-1/2” on centers.
FCS-407
Beam Bolster Upper
FCS-407
Beam bolster upper is used to support successive layers of steel one above the
other. Legs spaced 2-1/2” on centers in standard 5’-0” lengths.
Other lengths available on request.
FCS-408
Beam Bolster With Plate
FCS-408
Beam bolster with plate is used to support heavy bottom steel on soft material.
Details are same as for standard beam bolster with the addition of a bearing plate.
Available in 5’-0” lengths only.
FCS-418
Continuous High Chair Upper
FCS-418
Continuous high chair upper is used for supporting one layer of steel above another
and spacing them to required distance. May be used on soft material or fill. Standard
leg spacing is 7-1/2” on centers. Heights and lengths are same as slab bolsters.
Fabricated in standard 5’-0” lengths. Other lengths available on request.
FCS-409
Joist Chairs
FCS-409
Joist chairs are used to support two bottom bars in the ribs of joist- or grid-type
slabs. Available in 4”, 5”, and 6” widths and 3/4”, 1”
and 1-1/2” heights.
FCS-419
Continuous High Chair
With Plate
With Plate
FCS-419
Continuous high chair with plate is used to support slab steel on fill or other
soft materials. Details are same as continuous high chairs, with the addition
of bearing plates.
FCS-410
Individual Bar Chairs
FCS-410
Individual bar chairs are used to support wide-spaced light steel in slab/deck
construction. Available in 3/4”, 1”, 1-1/2”, and 1-3/4” heights.
