Light Forming
FCS-100
Standard Snap Tie
FCS-100 The snap tie uses
a loose washer and 1/2” or 1” break back and is manufactured to the
wall thickness needed.
FCS-109 Pencil
rod
FCS-109
Pencil rod is available in 1/4” and 3/8” diameters, 10 to 20 ft. lengths,
and 100 lb. coils. Used with rod clamps for many odd forming applications.
2:1 Safety factor/load rating: 2,250 lb.
2:1 Safety factor/load rating: 1/4” - 1,250 lb.; 3/8” - 3,000 lb.
Products
FCS-101
Heavy-Duty Snap Tie
FCS-101 The heavy-duty snap
tie uses a loose washer and 1/2” or 1” break back and is manufactured
to the wall thickness needed.
FCS-110 Rod
Clamps
FCS-110
Rod clamps are available in 1/4” and 3/8” diameters. Manufactured
of malleable iron. Use nut and bolt method to hold pencil rod in place.
2:1 Safety factor/load rating: 3,250 lb.
FCS-112 Rod
Tightening Wrenches
FCS-112
Rod tightening wrenches are used to tighten pencil rod. Wrench is set behind
rod clamps or form clamps to tighten pencil rod.
FCS-102 Standard
Plastic Cone
Snap Tie
Snap Tie
FCS-102 The standard plastic
cone snap tie uses a
1” x 1” plastic cone. The cone produces a 1” break back area and is manufactured to the wall thickness needed.
1” x 1” plastic cone. The cone produces a 1” break back area and is manufactured to the wall thickness needed.
2:1 Safety factor/load rating: 2,250 lb.
FCS-113 Nail
and Form Stakes
FCS-113
Nail and form stakes are used in flat work forming to hold lumber forms or steel
curb forms in place. Made from grade 60 steel with tips forged to increase tip
life. Made in the U.S.A. No soft foreign steel used. Available in 3/4” and
7/8” diameters with 12” to 48” lengths. Available with or without
holes.
FCS-103 Heavy-Duty
Plastic Cone Snap Tie
FCS-103
The heavy-duty plastic snap tie uses a 1” x 1” plastic cone. The
cone produces a 1” break back area and is manufactured to the wall thickness
needed.
2:1 Safety factor/load rating: 3,250 lb.
FCS-114
Loop Ties
FCS-114
Loop ties are used to space steel-ply forms to desired thickness with a 1”
break back.
FCS-104
Water-Resistant Snap Tie
FCS-104 The water-resistant
snap tie uses a neoprene washer in the center of the tie that eliminates water
through the tie line.
2:1 Safety factor/load rating: 2,250 lb.; heavy duty - 3,000 lb.
2:1 Safety factor/load rating: standard - 2,250 lb.; heavy duty - 3,250 lb.
FCS-115
Cone Loop Ties
FCS-115 Cone loop ties are
used to space steel-ply forms to desired thickness. Made with a 1” x 1”
plastic cone. Produce a 1” break back area.
FCS-105
Snap Tie Wedges
FCS-105 The snap tie wedge
is used with any style of snap tie to slip over the end to provide proper distribution
of load on formwork.
2:1 Safety factor/load rating: standard - 2,250 lb.; heavy duty - 3,000 lb.
2:1 Safety factor/load rating: standard - 3,000 lb.; heavy duty - 5,000 lb.
FCS-116 Base
Ties
FCS-116
Base ties are used to space steel-ply forms at bottom and/or top. No break
back.
FCS-106
Form Brace Aligners
FCS-106 Form brace aligners
are used with plywood, steel ply, or column forms to align form. Adjustment of
5” is available to give proper alignment needed. Two styles of end plates:
straight and bent.
FCS-117
X-Flat Ties
FCS-117 X-flat ties are used
to space steel-ply forms to desired thickness. Made with a 1/4” break back.
2:1 Safety factor/load rating: standard - 3,000 lb.; heavy duty - 3,500 lb.
FCS-107 “A”
Bracket
FCS-107
The “A” bracket is a single waler bracket used with plywood and
a single 2 x 4 waler.
2:1 Safety factor/load rating: 2,250 lb.
FCS-118
Wedge Bolts
FCS-118 Wedge bolts are used
to attach loop ties and flat ties to steel-ply panels.
FCS-108 “C”
Bracket
FCS-108
The “C” bracket is used to attach vertical strongbacks to formwork.
FCS-119
One-Piece Waler Brackets
FCS-119
One-piece waler brackets are used to align steel-ply forms.
2:1 Safety factor/load rating: 2,250 lb.
